Zone model predictive control for pressure management of water distribution network

In the water distribution network (WDN), although the water demand of the node is changing constantly, the water quantity and water pressure of the node need to be met at each moment. To realize energy saving and consumption reduction, it is proposed to control the nodal water head of WDN in an appropriate narrow range. The frequent large fluctuation of the water demand, which may lead the water pressure exceed the expected range, increases the difficulty of the zone control. To realize optimized WND control, a novel zone predictive control is proposed, where two switching cases are considered. The switching condition is whether there are feasible solutions to keep the pressure within the expected region over the prediction horizon. When the condition is satisfied, the controller minimizes the variation of inputs with constraints of pressure range for ensuring the tank level staying within the expected zone and obtaining optimal economic cost. When the current pressure is out of the expected region or the condition is not satisfied due to the large variation of water demand, a reference trajectory of outputs is introduced, which is combined with the inputs as an optimization variable, and the constraints of expected zone are moved from the output to the introduced reference trajectory. Through minimizing the distance between reference trajectory and output, the controller will keep the tank level from deviating too far from the expected zone and will drive the tank level rapidly into the expected zone once the tank level exceeds the expected range. An application of the proposed zone MPC to WDN in Shinan District of Shanghai is given to illustrate its effectiveness.     

应用变频器技术实现SO2风机节能改造

铜目前,硫酸车间制酸一系列共有三台SO2风机,这三台风机均采用液力耦合器的调速方式,这种方式可以实现无极调速,但是存在着传动效率低,耗能大的缺点,并且这三台风机均已使用20年以上,处于设备的中晚期,工作效率已大大降低。目前行业内,均采用先进的变频调速方式。使用变频器来控制风机的转速,可以极大的节省电能,尤其是在低负荷情况下,可以实现低转速运转,大大提高硫酸系统的综合能耗指标。     

浅析火力发电厂汽水系统中内径管与外径管的设计选择

按照管道加工工艺的不同,管道可分为内径控制管和外径控制管。通过热轧工艺生产的外径控制无缝钢管,可满足火力发电厂汽水系统中绝大部分管道的使用要求。对于超(超)临界机组的主蒸汽和高温再热蒸汽管道采用的P91/P92材质的大口径厚壁无缝钢管,由于对材料性能和加工工艺有特殊要求,因此宜采用内径控制管。     

Investigation on elemental mercury removal by cerium modified semi-coke

Coal-fired power plant is the largest anthropogenic mercury source. Active carbon injection technique has been widely used to control the mercury emissions. However, high operation cost limits its development and it is necessary to find other potential mercury sorbents. In this study, raw semi-coke and a series of novel cerium (Ce) modified semi-cokes were synthesized and utilized for removing elemental mercury (Hg⁰) from simulated flue gas. It is noteworthy that the efficiencies were tested without hydrogen chloride (HCl) in order to evaluate the sorbents efficacy for low-chlorine (Cl) coal. The results show that the modified sorbents exhibited the best performance at 150 °C. The performance of sorbent could be reinforced due to the existence of oxygen (O₂), nitric oxide (NO) and HCl. The adverse effect caused by sulfur dioxide (SO₂) reduced dramatically after Ce modification. The negative impact of ammonia (NH₃) on Hg⁰ removal in this study could be neglected owing to the tiny concentration of NH₃. Raw semi-coke provided sufficient carbon content, which is favorable to mercury adsorption. As Ce loading increased, the carbon structure changed and the crystal of cerium oxide was formed in the modified semi-coke. The mass fraction of cerium oxide on the sorbent was over 4.4% when the concentration of Ce modification solution was higher than 0.2 mol L⁻¹. The redox reaction activity and the oxygen storage ability of Ce³⁺/Ce⁴⁺ gave a huge boost to the performance of modified semi-coke. The addition of Ce also had an impact on the proportion of oxygen species.     

Effects of water-soluble soybean polysaccharide on rheological properties,stability and lipid digestibility of oil-in-water emulsion during in vitro gastrointestinal digestion

Water-soluble soybean polysaccharide (SSPS) is a naturally occurring emulsifier. SSPS was used as the sole emulsifier to stabilize an oil-in-water (O/W) emulsion. The effects were investigated of different SSPS concentrations (3–20% (w/w)) on the lipid digestibility, rheological properties and stability of O/W emulsions during in vitro digestion model. The droplet size of the emulsions tended to increase during the oral phase because the emulsions were unstable and droplets coalesced, except with a SSPS concentration of 20% (w/w). The presence of SSPS markedly reduced the free fatty acid (FFA) content after its stabilized O/W emulsion passed through in vitro gastrointestinal digestion. The amount of FFA significantly decreased as the concentration of SSPS increased due to SSPS stabilization film on oil droplet surface and high viscous system. SSPS may be an attractive alternative ingredient to control the lipid digestibility of emulsions for various food products.     

水电站大型竖井施工安全风险控制措施研究

竖井是大型水电工程中广泛采用的重要建筑物,但竖井的传统施工方法存在施工程序复杂、人工劳动强度大、施工效率不高等特点,同时还存在较大的安全风险。通过对杨房沟水电站大型竖井施工过程的研究,总结出精细化控制爆破、小溜渣井施工方式,同时也设计了一套用于运输的综合提升系统。采用上述创新方法不仅减少了繁琐的施工程序,降低了安全施工风险,而且大量采用机械化手段进一步提高了施工效率,确保了该工程竖井施工的安全风险可控。相关措施可为类似工程的竖井施工提供较好的借鉴作用。     

解析“限额设计”措施对建设项目投资的控制对策

经济新常态下,我国建筑行业得到快速发展。对于建筑工程来说,为节约成本,在"限额设计"思想指导下,必须开展精细化管理,从而提高项目投资的控制能力。然而,在项目建设过程中对于"限额设计"措施的利用水平并不高,不利于企业的可持续发展。因此,本文在分析"限额设计"措施的基础上,提出对建设项目投资的控制对策,希望能够对相关施工管理人员提供借鉴。     

A new controller for boost dc–dc converters based on a novel sliding surface

ABSTRACT

In this paper, two control schemes for boost converters affected by uncertainties in input voltage and load are proposed. The boost converter dynamics is redefined in terms of new state variables to facilitate the use of a disturbance observer that can estimate matched and unmatched disturbances. A sliding surface, which is new in the context of boost converters, is proposed to enable tracking and regulation of output voltage without requiring measurement of input voltage and load current. The stability of the overall system including the disturbance observer, the sliding variable and the output is proved. The performance of the schemes is assessed for regulation of output voltage and tracking of reference voltage by simulation as well as experimentation in which various types of uncertainties and various types of reference voltages are considered.